FillmoreVanzandt5 - IO魔兽世界私服 大灾变汉化项目


出自IO魔兽世界私服 大灾变汉化项目

跳转到: 导航, 搜索

Most of the office chairs available today include multiple ergonomic and support features or functional improvements when compared with office chairs of the past. The top line ergonomic computer or task chairs built today, may seem to possess more levers or adjustments than a small plane. If you own the Piper 4000 office task chair this article is not for you, you might want to locate your manual for further help locking the tray table in the upright position.

For individuals who own or want to purchase a base to mid-range office chair in the future, I hope their list assists you in your selection and/or operation of the current or next, chair.

  1. 1 Pneumatic Seat Height Adjustment:

Most office, computer, task, ergonomic as well as executive chairs offer this function. Quite simply this describes how the seat height is raised or lowered. A pneumatic cylinder is attached to the chairs mechanism located under the seat cushion. This cylinder allows for fast and simple adjustment within a specified height range. This adjustment is often accomplished through the use of a paddle or lever located beneath the seat cushion on either the best or left side of the chair.

  1. 2 Tilt with Adjustable Tilt Tension:

Manufacturers may sometimes list tilt and tilt tension adjustment as two separate functions. I feel that they are closely related and the fact that you almost can't get one with no other, to be reason to deal with them as one feature. Most kinds of task, computer and executive chairs feature tilt with adjustable tilt tension. Tilt is exactly what enables the consumer to rock or recline backwards to some set limit based on the chairs mechanism or control plate. The tilt tension adjustment is modified by turning a usually large round knob found beneath the seat toward the leading from the chair. (Some chair manufacturers are moving the tilt tension control to some lever or dial elsewhere on the chair, but many are still found in the front.) The tilt tension knob increases or decrease the amount of force needed to result in the chair rock or recline backward. Usually, several turns of the tilt tension knob are required to loosen or tighten the tension to a noticeable level.

sillas en linea

  1. 3 Tilt Lock:

This function sounds easy however, you could be surprised at how many individuals have difficulty with this, and it's not always their fault. Among the problems with tilt lock is that not all manufacturers make use of the same lever or put the lever in the same area to control this function leading to various ways a chairs tilt lock adjustment might be modified. Consulting your chairs owners manual is always the best practice to help familiarize oneself together with your chairs specific controls. In general some manufactures could use levers or paddles like the ones used for seat height adjustment to manage tilt lock, or many make use of a single lever or rod that requires pushed in or pulled out to lock or unlock the chairs tilt. Usually, once a chair is locked in a tilt position it cannot be unlocked before the user reclines or tilts back several degrees further relieving pressure from the lock bar or pin so the chair may be reset back to the initial position. Tilt lock can also be used to lock out tilt completely when the chair is incorporated in the upright position.

  1. 4 (2-to-1) Synchro Tilt:

Lots of computer and task chairs offer this selection. Basically, this function permits the backrest to recline two times as fast because the seat cushion or at a 2-to-1 ratio, this allows the consumer to recline while keeping their seat relatively level towards the floor rather than the traditional "rocking chair" type recline.

  1. 5 Back Height Adjustment:

Many computer, task, ergonomic and drafting chairs now offer this selection. Back height adjustment allows the user to put the backrest's lumbar support area within a fixed range for customized support. Back height adjustment is often modified by turning a know located on the backrest stem or frame. Once this knob is loosened the backrest can be raised or lowered to the desired position, then your knob is tightened to hold position. Ratchet back height adjustment is also becoming more popular with some newer types of office chairs, this eliminates the use of a knob and it is set or controlled simply by raising or lowering the backrest to the desired level after which locked into position by utilisation of the ratchet style frame stem.

Obviously there are many other chair functions in the marketplace and depending on your individual preference, daily period of time put in a chair and your intended use you may need or want an office chair with more ergonomic controls or features. If that's the case, please go here at the bottom from the page for more information along with a range of available ergonomic office chairs. Your office chair is the home abroad, so proper comfort and support are a must.